Auto Molding

Being supported by an state-of-the-art and skilled IT team, we could supply technical support on pre-sales & after-sales service for Auto Molding, Material Selection, Injection Molding Tool Carts, Family Molding, We wholeheartedly welcome customers all over the world come to visit our factory and have a win-win cooperation with us! Innovation, excellent and reliability are the core values of our business. These principles today extra than ever form the basis of our success as an internationally active mid-size company for Auto Molding, Nowadays our merchandise sell all over the domestic and abroad thanks for the regular and new customers support. We supply high quality product and competitive price, welcome the regular and new customers cooperate with us!


  • Control Unit and Charge Connector bottom cover

    Control Unit and Charge Connector bottom cover

    This plastic part is the main part of the Control Unit and Charge Connector bottom cover.

     

    The material used for this plastic part is ABS fireproof Materials, This plastic part is the appearance part of the product and an important assembly part. It is fixedly connected to the middle shell with 6 brass nuts, and needs to pass a 5-meter drop test.

     

    This ABS fireproof material has reached the V0 level, ensuring safety and stability during on-board charging. The plastic mold for this plastic part is made by a three-plate mold. cold runner in the middle point, this advantage can make the whole product injection uniformly and not easily deformed.

     

    This set of injection molds, our design life is 500,000 times. The fixing between the products is designed with  overmold brass nuts. The copper nut is placed in the mold and then injected. This ensures that the copper nut can be more firmly fixed to the plastic part.

     

    If you have similar products, Please do not hesitate to contact us. We will be your best partner.

  • Insulating Bobbin

    Insulating Bobbin

     

    ✭ This is a sealed plastic part inside the car, using high temperature and cold resistant PA66+30% plastic material. The working environment temperature of this part is between -40 and +100 degrees. It is resistant to outdoor weathering and meets Volkswagen’s 50185 standard.

     

     This plastic part is a part of a Oil filters Plastic ccessories from a Germany customer. The biggest difficulty of this part is that its wall thickness is only 0.45mm. This set of molds adopts the HASCO standard. The Core material is 1.2343 (ESR)hardened steel.

     

    ✭ The mold structure is relatively simple, with two Becu core inserts structures. The product material is PA6+30GF, and the surface needs to be VDI-24. Product size accuracy requirement is +/-0.05. The mold delivery time is 45 days, and the injection cycle is 12 seconds. The mold was tested only twice, and the customer asked us to arrange an export to the Germany injection molding factory.

     

     If you have similar products, Please do not hesitate to contact us. We will be your best partner.

  • Angle buffer

    Angle buffer

      This is an Angle buffer plastic part for Volkswagen, using high temperature and cold resistant PA66+30% plastic material. The working environment temperature of this part is between -40 and +150 degrees. It is resistant to outdoor weathering and meets Volkswagen’s 50185 standard.

     

      This product is used in the support position of auto parts to make some parts of the car stable and reliable. This set of molds adopts the HASCO standard. The Core material is 1.2344 (ESR)hardened steel.

     

    ✭  The mold structure is relatively simple, with two Becu core inserts structures. The product material is PA6+30GF, and the surface needs to be VDI-21. Product size accuracy requirement is +/-0.05. The mold delivery time is 30 days, and the injection cycle is 30 seconds. The mould use INCOE hot runner into cold runner for sub gate. The mold was tested only twice, and the customer asked us to arrange an export to the Germany injection molding factory.

     

      If you have similar products, Please do not hesitate to contact us. We will be your best partner.

  • Oil filters Plastic ccessories

    Oil filters Plastic ccessories

      The filter media developed by customer are multi-layered compounds made from fibre glass or synthetic materials which allow optimal interaction with the bio fuels and carbon particles dissolved in the oil. They guarantee the highest motor performance even with the introduction of new «long life» oils, additives, mineral and non-mineral oils and their consequent degradation. The structure of the new and traditional filter media ensures a high permeability and therefore minor load losses in the engine lubrication system.

     

     This plastic part is a part of a Oil filters Plastic ccessories from a Italy customer. This set of molds adopts the HASCO standard. The Core material is 1.2344 (ESR)hardened steel. The mold structure is relatively simple, with four independent core inserts structures. The product material is PA6+30GF, and the surface needs to be VDI-33. The mold delivery time is 40 days, and the injection cycle is 38 seconds. The mold was tested only twice, and the customer asked us to arrange an export to the Italy injection molding factory.

     

      If you have similar products, please feel free to let us make molds for you. Our quality and service are the best.