Featured Products
-
factory Outlets for China plastic mold
✭ This is a plastic part used to fix the PCBA board, in order to keep the PCBA balanced and ensure the stability of the transmission signal. The requirements for this plastic part are very high, and the precision of the parts of the plastic product must be within 0.02mm. So, if several contact surfaces of the PCBA are fixed, the product cannot be draft angle, and the mold must be designed and manufactured in a Slider method.
✭ The high temperature resistant PC material used in this plastic material is a commonly used material for car lights. This material has the advantages of small deformation, good stability, high temperature resistance and cold resistance.
✭ This set of molds adopts the HASCO standard. The Core material is 1.2343 hardened steel. The mold structure is relatively complex structure, need to use exchangeable insert to production four different parts. The product material is PC, and the surface needs to be Polish 600. Product size accuracy requirement is +/-0.02. The mold delivery time is 38 days, and the injection cycle is 27 seconds. The mold was tested only twice, and the customer asked us to arrange an export to the Germany injection molding factory.
✭ If you have similar products, Please do not hesitate to contact us. We will be your best partner.
-
China Mold Components electrical products
✭ This plastic part is the main part of the Control Unit and Charge Connector bottom cover.
✭ The material used for this plastic part is ABS fireproof Materials, This plastic part is the appearance part of the product and an important assembly part. It is fixedly connected to the middle shell with 6 brass nuts, and needs to pass a 5-meter drop test.
✭ This ABS fireproof material has reached the V0 level, ensuring safety and stability during on-board charging. The plastic mold for this plastic part is made by a three-plate mold. cold runner in the middle point, this advantage can make the whole product injection uniformly and not easily deformed.
✭ This set of injection molds, our design life is 500,000 times. The fixing between the products is designed with overmold brass nuts. The copper nut is placed in the mold and then injected. This ensures that the copper nut can be more firmly fixed to the plastic part.
✭ If you have similar products, Please do not hesitate to contact us. We will be your best partner.
-
Plastic Medical injection production supplier
✭ Our company is very experienced in the field of plastic molds for medical catheters. Not only mold manufacturing, but also medical-grade injection molding. The plastic material used in this medical catheter is very expensive and requires very high quality molds. The inner hole of the product is only 1.27mm in diameter. Our mold inserts are made of SKH51 high-quality material. This material can ensure the tolerance of the small holes and ensure the service life of the inserts pin.
✭ The plastic material of this catheter is a 65-degree soft material. During the injection molding process, it is difficult to demold. Through our technological improvement, our current mold production is smooth and the injection cycle is shortened. At present, our injection molding cycle is 16 seconds, which saves delivery time and cost to our customers.
✭ Our set of molds is made of S136 hardened material, and the life of the mold should reach 1 million times. In the injection molding production process, it is necessary to ensure the accuracy of the product, and ensure that it is stable and firm during the assembly process.
✭ If you have similar products, Please do not hesitate to contact us. We will be your best partner.
-
OEM/ODM China Injection Molding Plastic Production Custom Part
✭ In addition to the design and appearance of the cushion of a plastic chair, its quality is also very important. The plastic material we use is PP+20GF, which has good toughness and excellent compression resistance.
✭ The mold of this plastic part uses NAK80 mold steel, which has good polishing performance. In order to get a high-quality surface effect and a good texture surface, NAK80 material performs very well. The life expectancy of this model is up to 500,000 times. The water transportation design and strength of the mold are all designed and manufactured on the basis of this life.
✭ The product injection cycle is 42 seconds, and the daily production capacity can reach 850. The short manufacturing cycle has also greatly reduced the cost of the product, and has won more profit margins for our customers.
✭ If you have similar products, Please do not hesitate to contact us. We will be your best partner.
-
China plastic injection production supplier
✭ We can make all kinds of helmet mould as customer’s require,the quotation can be provide based on customer’s drawing or sample. our mould are both excellent in quality and reasonable in price.
✭ This plastic part is a part of a Bicycle helmet from a USA customer. This set of molds adopts the HASCO standard. The Core material is 1.2343 (ESR)hardened steel. The mold structure is relatively simple, with four independent core inserts structures. The product material is PP plastic material, and the surface needs to be Polish600. The mold delivery time is 45 days, and the injection cycle is 37 seconds. The structure of this mold is complex, with four large sliders and two large lifters. The ejection adopts inclined jacking plus push block ejection.
✭ The mold transportation design needs to be evenly divided to ensure that the product can be uniformly cooled. Make the product achieve high-precision size and high-quality appearance.
✭ If you have similar products, please feel free to let us make molds for you. Our quality and service are the best.
-
Hot sale Factory China Plastic Mold Maker Socket Mold Electrical Switch Socket Mould/Moulding
✭ This plastic part is the main part of the Control Unit and Charge Connector bottom cover.
✭ The material used for this plastic part is ABS fireproof Materials, This plastic part is the appearance part of the product and an important assembly part. It is fixedly connected to the middle shell with 6 brass nuts, and needs to pass a 5-meter drop test.
✭ This ABS fireproof material has reached the V0 level, ensuring safety and stability during on-board charging. The plastic mold for this plastic part is made by a three-plate mold. cold runner in the middle point, this advantage can make the whole product injection uniformly and not easily deformed.
✭ This set of injection molds, our design life is 500,000 times. The fixing between the products is designed with overmold brass nuts. The copper nut is placed in the mold and then injected. This ensures that the copper nut can be more firmly fixed to the plastic part.
✭ If you have similar products, Please do not hesitate to contact us. We will be your best partner.
-
Professional Design China Customized Plastic Car Accessories
✭ This plastic part is a part of a car from a French customer. This set of molds adopts the HASCO standard. The Core material is 1.2343 (ESR)hardened steel.
✭ The mold structure is relatively simple, with two Lifters structures. The product material is PA66+30GF, and the surface needs to be polished #600. The mold de
livery time is 35 days, and the injection cycle is 32 seconds. The mold was tested only twice, and the customer asked us to arrange an export to the French injection molding factory.
✭ If you have similar products, please feel free to let us make molds for you. Our quality and service are the best.
-
Mold Manufacturing in China
✭ With the continuous expansion of the robot market, many robot manufacturing companies have launched very fierce competition. The service life of the robot, reducing noise has become a major technical problem. This part of the small precision servo servo plays a very important role, because each joint of the robot needs a servo to achieve different actions.
✭ Our plastic part is the housing part of the servo steering gear, and the plastic material used is high-performance PA66+30GF material. Under the action of the gears of the servo steering gear, it can ensure that the plastic shell will not deform and remain stable during the movement of the gears. This plastic shell has very high requirements for the accuracy of the mold, especially the dimensional tolerance of the gear positioning hole, to ensure that it is within the tolerance range of 0.005mm. Our mold materials are manufactured using imported materials from Becu and S136.
✭ This plastic shell is composed of three plastic shells, an upper shell, a middle shell and a lower shell. They must be perfectly matched to ensure that the center position of the gear positioning hole is consistent. Therefore, for this kind of precision plastic parts, the mould cavity is only 2, so that the size can be better controlled.
✭ If you have similar products, Please do not hesitate to contact us. We will be your best partner.
-
Small precision plastic parts injection production
✭ This is an Angle buffer plastic part for Volkswagen, using high temperature and cold resistant PA66+30% plastic material. The working environment temperature of this part is between -40 and +150 degrees. It is resistant to outdoor weathering and meets Volkswagen’s 50185 standard.
✭ This product is used in the support position of auto parts to make some parts of the car stable and reliable. This set of molds adopts the HASCO standard. The Core material is 1.2344 (ESR)hardened steel.
✭ The mold structure is relatively simple, with two Becu core inserts structures. The product material is PA6+30GF, and the surface needs to be VDI-21. Product size accuracy requirement is +/-0.05. The mold delivery time is 30 days, and the injection cycle is 30 seconds. The mould use INCOE hot runner into cold runner for sub gate. The mold was tested only twice, and the customer asked us to arrange an export to the Germany injection molding factory.
✭ If you have similar products, Please do not hesitate to contact us. We will be your best partner.
-
China 2K Mold Manufacturer
✭ This is a sealed plastic part inside the car, using high temperature and cold resistant PA66+30% plastic material. The working environment temperature of this part is between -40 and +100 degrees. It is resistant to outdoor weathering and meets Volkswagen’s 50185 standard.
✭ This plastic part is a part of a Oil filters Plastic ccessories from a Germany customer. The biggest difficulty of this part is that its wall thickness is only 0.45mm. This set of molds adopts the HASCO standard. The Core material is 1.2343 (ESR)hardened steel.
✭ The mold structure is relatively simple, with two Becu core inserts structures. The product material is PA6+30GF, and the surface needs to be VDI-24. Product size accuracy requirement is +/-0.05. The mold delivery time is 45 days, and the injection cycle is 12 seconds. The mold was tested only twice, and the customer asked us to arrange an export to the Germany injection molding factory.
✭ If you have similar products, Please do not hesitate to contact us. We will be your best partner.
-
Hot New Products China High Precision Home Appliance Plastic Injection Moulding Mould
✭ This plastic part is the main part of the capsule coffee machine, and it is the core part of the capsule coffee machine.
✭ The material used for this plastic part is PA66+45GF, and there are three main plastic parts that need to be assembled with this plastic part. The sliding part of the machine and the disassembly of the capsule coffee are inseparable from this core plastic part.
✭ Its advantages are not easy to deform, good stability, high precision, to ensure that the coffee machine is stable during work and reduce noise.
✭ This mold is our company’s production mold, which mainly provides plastic parts services for our coffee machine manufacturers. The production capacity of this set of molds is 800 per day.
✭ If you have similar products, Please do not hesitate to contact us. We will be your best partner.
-
China Customized/Designing Electrical Outlet Cover Box Plastic Injection Mold
✭ This is a sealed plastic part inside the car, using high temperature and cold resistant PA66+30% plastic material. The working environment temperature of this part is between -40 and +100 degrees. It is resistant to outdoor weathering and meets Volkswagen’s 50185 standard.
✭ This plastic part is a part of a Oil filters Plastic ccessories from a Germany customer. The biggest difficulty of this part is that its wall thickness is only 0.45mm. This set of molds adopts the HASCO standard. The Core material is 1.2343 (ESR)hardened steel.
✭ The mold structure is relatively simple, with two Becu core inserts structures. The product material is PA6+30GF, and the surface needs to be VDI-24. Product size accuracy requirement is +/-0.05. The mold delivery time is 45 days, and the injection cycle is 12 seconds. The mold was tested only twice, and the customer asked us to arrange an export to the Germany injection molding factory.
✭ If you have similar products, Please do not hesitate to contact us. We will be your best partner.
