Quality Inspection for OEM ABS/POM/Delrin/PP/Nylon Parts CNC Machining by CNC Machining Center

Short Description:

This is a housing for electronic products, and the working environment is in water. Therefore, it is necessary to ensure a very high flatness and a high-quality waterproof level.

The material used for this plastic part is ABS-758 Materials, When placing the sealing ring, use 10 copper nuts to fix the upper and lower shells. Guarantee that the electronic parts in the housing will not be damaged. The 10 piece copper nuts is overmold in plastic molding, The firmness of the plastic and copper nuts is guaranteed.

Of course, in order to save the cost, we use a nut jig to improve the injection cycle during the injection molding process.

This transparent shell has very strict requirements on its flatness and appearance. The working life in water is guaranteed to be more than 10 years.

This mold is our company’s production mold, It specializes in mold manufacturing and injection molding production of housings for household appliances.. The production capacity of this set of molds is 1000 pieces per day.

If you have similar products, Please do not hesitate to contact us. Chapman Maker will be your best partner.


  • USD: 1000
  • Product Detail

    We now have a highly efficient crew to deal with inquiries from clients. Our intention is “100% shopper pleasure by our merchandise quality, price tag & our staff service” and take pleasure in a very good standing amongst purchasers. With quite a few factories, we can easily provide a wide vary of Quality Inspection for OEM ABS/POM/Delrin/PP/Nylon Parts CNC Machining by CNC Machining Center, Being a young growing company, we might not the best, but we are trying our best to be your good partner.
    We now have a highly efficient crew to deal with inquiries from clients. Our intention is “100% shopper pleasure by our merchandise quality, price tag & our staff service” and take pleasure in a very good standing amongst purchasers. With quite a few factories, we can easily provide a wide vary of China Plastic Part Machining, Excellent quality, competitive price, punctual delivery and dependable service can be guaranteed. For further inquires remember to do not hesitate to contact us. Thank you – Your support continuously inspires us.

    Mould NO. CPM-191001
    Surface Finish Process MT-11010
    Plastic Material PA66
    Part weight 71.7g
    Design Software UG
    Part size 145mm X 72mm X 21mm
    Customized Customized
    Application Automobile
    Mould size 350 X 400 X 381mm
    Mould Name Car Parts Muold
    Mould Cavity 1*2
    Runner One INCOE Hot runner change cold runner for sub gate
    Standard Hasco
    Mould Material 1.2343/1.1730/1.2767
    Mould Life Cycle 500,000
    Lead Time 35days
    Mould Cycle Time: 32′s
    Payment T T

    Application field

    Vehicle doors often include brakes, or ‘stays’, that slow the door down just before it closes, and also prevent the door opening further than its design specification. The current trend is to have a three-stage door brake.

    Door brakes exist because the doors on the first vehicles were heavy, so they had to be pushed hard to make them close. Soon after, automotive manufacturers managed to construct lighter doors, but users were used to closing doors with force so doors quickly became damaged. Door brakes were then introduced to slow down the door just before the door closed to prevent damage; these soon became standard.

    A conventional door, also known as a regular door is hinged at the front-facing edge of the door, and so allows the door to swing outward from the body of the car. These doors are relatively safe, in that if they are opened during forward motion of the vehicle, the wind resistance will work against the opening door, and will effectively force its closure. The operation of a vehicle door entering, exiting, or standing out side an opened vehicle door is extremely dangerous particularly at night even when looking both ways. The issue is the vehicle door in most cases provides not visual warning to other vehicle drivers to allow accident avoidance of another vehicle driver to have the time to take avoidance measures. New advancements have been made to allow the viewing of the opened vehicle door at night with the addition of highly reflective tape applied to the lower interior edge of the vehicle door . These new advancements allow the opened vehicle door to be seen even with a person blocking the prior art systems such as a reflector or a light by providing reflex reflectivity exceeding fifty percent of the vehicle door behind a person legs blocking the opened vehicle door at night.

    Project Management


    asfg

    Mould Workshop


    Medical-(7)
    Medical-(9)
    Medical-(11)
    Medical-(12)
    Medical-(13)

    Customer visit

    Creating value for customers and making it perfect is our philosophy. You will realize greater profits by working together with CPM!




    Medical-(3)
    Medical-(10)
    Medical-(8)

    Mould standard

    We are experienced in all kinds of steels and fittings of international standard

    Medical-(16)

    Packaging&Warehousing

    cshvjxckvWe now have a highly efficient crew to deal with inquiries from clients. Our intention is “100% shopper pleasure by our merchandise quality, price tag & our staff service” and take pleasure in a very good standing amongst purchasers. With quite a few factories, we can easily provide a wide vary of Quality Inspection for OEM ABS/POM/Delrin/PP/Nylon Parts CNC Machining by CNC Machining Center, Being a young growing company, we might not the best, but we are trying our best to be your good partner.
    Quality Inspection for China Plastic Part and ABS Machining, Excellent quality, competitive price, punctual delivery and dependable service can be guaranteed. For further inquires remember to do not hesitate to contact us. Thank you – Your support continuously inspires us.


  • Previous:
  • Next:

  • Write your message here and send it to us