High reputation Cnc Machining Prototype - Small precision servo steering gear cover – Chapman

Short Description:


Product Detail

Related Video

Feedback (2)

Our enterprise insists all along the standard policy of "product high-quality is base of business survival; client satisfaction could be the staring point and ending of an business; persistent improvement is eternal pursuit of staff" as well as consistent purpose of "reputation first, client first" for Injection Moulding Die Cost, Odm Service, Car Parts, Should further information be required, please contact us at any time!
High reputation Cnc Machining Prototype - Small precision servo steering gear cover – Chapman Detail:

Mould NO. CPM-150226
Surface Finish Process VDI-24
Plastic Material PA66+30GF
Part weight 18.65g
Design Software UG
Part size 45.00*25.0*18.0 mm
Customized Customized
Application Connectors 
Mould size 250 * 250 * 311mm
Part Name Small precision servo steering gear cover
Mould Cavity 1*2
Runner Cold runner for sub gate
Standard DME
Mould Material S136/S50C/S-7/BeCU
Mould Life Cycle 1,000,000
Lead Time 25 days
Mould Cycle Time: 25′s
Payment T T

Application field

In industrial type servo motors the position feedback sensor is usually a high precision encoder, while in the smaller RC or hobby servos the position sensor is usually a simple potentiometer. The actual position captured by these devices is fed back to the error detector where it is compared to the target position. Then according to the error the controller corrects the actual position of the motor to match with the target position.

Hobby servos are small in size actuators used for controlling RC toys cars, boats, airplanes etc. They are also used by engineering students for prototyping in robotics, creating robotic arms, biologically inspired robots, humanoid robots and so on.

The potentiometer is attached on the final gear or the output shaft, so as the motor rotates the potentiometer rotates as well, thus producing a voltage that is related to the absolute angle of the output shaft. In the control circuit, this potentiometer voltage is compared to the voltage coming from the signal line. If needed, the controller activates an integrated H-Bridge which enables the motor to rotate in either direction until the two signals reach a difference of zero.

A servo motor is controlled by sending a series of pulses through the signal line. The frequency of the control signal should be 50Hz or a pulse should occur every 20ms. The width of pulse determines angular position of the servo and these type of servos can usually rotate 180 degrees (they have a physical limits of travel).

Generally pulses with 1ms duration correspond to 0 degrees position, 1.5ms duration to 90 degrees and 2ms to 180 degrees. Though the minimum and maximum duration of the pulses can sometimes vary with different brands and they can be 0.5ms for 0 degrees and 2.5ms for 180 degrees position.

Project Management


asfg

Mould Workshop


Medical-(7)
Medical-(9)
Medical-(11)
Medical-(12)
Medical-(13)

Customer visit

Creating value for customers and making it perfect is our philosophy. You will realize greater profits by working together with CPM!




Medical-(3)
Medical-(10)
Medical-(8)

Mould standard

We are experienced in all kinds of steels and fittings of international standard

Medical-(16)

Packaging&Warehousing

cshvjxckv


Product detail pictures:

High reputation Cnc Machining Prototype - Small precision servo steering gear cover  – Chapman detail pictures

High reputation Cnc Machining Prototype - Small precision servo steering gear cover  – Chapman detail pictures

High reputation Cnc Machining Prototype - Small precision servo steering gear cover  – Chapman detail pictures

High reputation Cnc Machining Prototype - Small precision servo steering gear cover  – Chapman detail pictures

High reputation Cnc Machining Prototype - Small precision servo steering gear cover  – Chapman detail pictures

High reputation Cnc Machining Prototype - Small precision servo steering gear cover  – Chapman detail pictures

High reputation Cnc Machining Prototype - Small precision servo steering gear cover  – Chapman detail pictures


Related Product Guide:

We regularly perform our spirit of ''Innovation bringing progress, Highly-quality making certain subsistence, Administration marketing benefit, Credit score attracting customers for High reputation Cnc Machining Prototype - Small precision servo steering gear cover – Chapman , The product will supply to all over the world, such as: Saudi Arabia, United States, Guinea, To meet the requirements of individual customers for each bit more perfect service and stable quality products. We warmly welcome customers around the world to visit us, with our multi-faceted cooperation, and jointly develop new markets, create a brilliant future!
  • We have been engaged in this industry for many years, we appreciate the work attitude and production capacity of the company, this is a reputable and professional manufacturer.
    5 Stars By Mignon from Canada - 2017.09.29 11:19
    The factory can meet continuously developing economic and market needs, so that their products are widely recognized and trusted, and that's why we chose this company.
    5 Stars By Helen from Jamaica - 2018.06.03 10:17
    Write your message here and send it to us