Factory Outlets Two Plate Injection Mould - Car Parts Mould – Chapman

Short Description:


Product Detail

Related Video

Feedback (2)

Our business puts emphasis on the administration, the introduction of talented personnel, as well as the construction of team building, trying hard to further improve the standard and liability consciousness of staff members customers. Our enterprise successfully attained IS9001 Certification and European CE Certification of Phone Case Mold Maker, Molded Plastic Parts, 3d Plastic Prototype Parts Inc, Teamwork is encouraged at all levels with regular campaigns. Our research team experiments on various developments in the industry for improvement in the products.
Factory Outlets Two Plate Injection Mould - Car Parts Mould – Chapman Detail:

Mould NO. CPM-191001
Surface Finish Process MT-11010
Plastic Material PA66
Part weight 71.7g
Design Software UG
Part size 145mm X 72mm X 21mm
Customized Customized
Application Automobile
Mould size 350 X 400 X 381mm
Mould Name Car Parts Muold
Mould Cavity 1*2
Runner One INCOE Hot runner change cold runner for sub gate
Standard Hasco
Mould Material 1.2343/1.1730/1.2767
Mould Life Cycle 500,000
Lead Time 35days
Mould Cycle Time: 32′s
Payment T T

Application field

Vehicle doors often include brakes, or ‘stays’, that slow the door down just before it closes, and also prevent the door opening further than its design specification. The current trend is to have a three-stage door brake.

Door brakes exist because the doors on the first vehicles were heavy, so they had to be pushed hard to make them close. Soon after, automotive manufacturers managed to construct lighter doors, but users were used to closing doors with force so doors quickly became damaged. Door brakes were then introduced to slow down the door just before the door closed to prevent damage; these soon became standard.

A conventional door, also known as a regular door is hinged at the front-facing edge of the door, and so allows the door to swing outward from the body of the car. These doors are relatively safe, in that if they are opened during forward motion of the vehicle, the wind resistance will work against the opening door, and will effectively force its closure. The operation of a vehicle door entering, exiting, or standing out side an opened vehicle door is extremely dangerous particularly at night even when looking both ways. The issue is the vehicle door in most cases provides not visual warning to other vehicle drivers to allow accident avoidance of another vehicle driver to have the time to take avoidance measures. New advancements have been made to allow the viewing of the opened vehicle door at night with the addition of highly reflective tape applied to the lower interior edge of the vehicle door . These new advancements allow the opened vehicle door to be seen even with a person blocking the prior art systems such as a reflector or a light by providing reflex reflectivity exceeding fifty percent of the vehicle door behind a person legs blocking the opened vehicle door at night.

Project Management


asfg

Mould Workshop


Medical-(7)
Medical-(9)
Medical-(11)
Medical-(12)
Medical-(13)

Customer visit

Creating value for customers and making it perfect is our philosophy. You will realize greater profits by working together with CPM!




Medical-(3)
Medical-(10)
Medical-(8)

Mould standard

We are experienced in all kinds of steels and fittings of international standard

Medical-(16)

Packaging&Warehousing

cshvjxckv


Product detail pictures:

Factory Outlets Two Plate Injection Mould - Car Parts Mould  – Chapman detail pictures

Factory Outlets Two Plate Injection Mould - Car Parts Mould  – Chapman detail pictures

Factory Outlets Two Plate Injection Mould - Car Parts Mould  – Chapman detail pictures

Factory Outlets Two Plate Injection Mould - Car Parts Mould  – Chapman detail pictures

Factory Outlets Two Plate Injection Mould - Car Parts Mould  – Chapman detail pictures


Related Product Guide:

We support our prospective buyers with ideal top quality merchandise and superior level provider. Becoming the specialist manufacturer in this sector, we have now attained abundant practical expertise in producing and managing for Factory Outlets Two Plate Injection Mould - Car Parts Mould – Chapman , The product will supply to all over the world, such as: Turkmenistan, Dubai, Brasilia, Our company upholds the spirit of "innovation, harmony, team work and sharing, trails, pragmatic progress". Give us a chance and we will prove our capability. With your kind help, we believe that we can create a bright future with you together.
  • The customer service staff's attitude is very sincere and the reply is timely and very detailed, this is very helpful for our deal,thank you.
    5 Stars By Eve from Munich - 2017.06.16 18:23
    The company's products can meet our diverse needs, and the price is cheap, the most important is that the quality is also very nice.
    5 Stars By Belle from venezuela - 2017.04.28 15:45
    Write your message here and send it to us