Factory Free sample R&D Research Development Mechanical Design - Car Parts Mould – Chapman

Short Description:


Product Detail

Related Video

Feedback (2)

Sticking for the basic principle of "Super Top quality, Satisfactory service" ,We've been striving to be an excellent business enterprise partner of you for Prototype Plastic Parts, Prototype Plastic Molding, Plastic Parts, We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!
Factory Free sample R&D Research Development Mechanical Design - Car Parts Mould – Chapman Detail:

Mould NO. CPM-191001
Surface Finish Process MT-11010
Plastic Material PA66
Part weight 71.7g
Design Software UG
Part size 145mm X 72mm X 21mm
Customized Customized
Application Automobile
Mould size 350 X 400 X 381mm
Mould Name Car Parts Muold
Mould Cavity 1*2
Runner One INCOE Hot runner change cold runner for sub gate
Standard Hasco
Mould Material 1.2343/1.1730/1.2767
Mould Life Cycle 500,000
Lead Time 35days
Mould Cycle Time: 32′s
Payment T T

Application field

Vehicle doors often include brakes, or ‘stays’, that slow the door down just before it closes, and also prevent the door opening further than its design specification. The current trend is to have a three-stage door brake.

Door brakes exist because the doors on the first vehicles were heavy, so they had to be pushed hard to make them close. Soon after, automotive manufacturers managed to construct lighter doors, but users were used to closing doors with force so doors quickly became damaged. Door brakes were then introduced to slow down the door just before the door closed to prevent damage; these soon became standard.

A conventional door, also known as a regular door is hinged at the front-facing edge of the door, and so allows the door to swing outward from the body of the car. These doors are relatively safe, in that if they are opened during forward motion of the vehicle, the wind resistance will work against the opening door, and will effectively force its closure. The operation of a vehicle door entering, exiting, or standing out side an opened vehicle door is extremely dangerous particularly at night even when looking both ways. The issue is the vehicle door in most cases provides not visual warning to other vehicle drivers to allow accident avoidance of another vehicle driver to have the time to take avoidance measures. New advancements have been made to allow the viewing of the opened vehicle door at night with the addition of highly reflective tape applied to the lower interior edge of the vehicle door . These new advancements allow the opened vehicle door to be seen even with a person blocking the prior art systems such as a reflector or a light by providing reflex reflectivity exceeding fifty percent of the vehicle door behind a person legs blocking the opened vehicle door at night.

Project Management


asfg

Mould Workshop


Medical-(7)
Medical-(9)
Medical-(11)
Medical-(12)
Medical-(13)

Customer visit

Creating value for customers and making it perfect is our philosophy. You will realize greater profits by working together with CPM!




Medical-(3)
Medical-(10)
Medical-(8)

Mould standard

We are experienced in all kinds of steels and fittings of international standard

Medical-(16)

Packaging&Warehousing

cshvjxckv


Product detail pictures:

Factory Free sample R&D Research Development Mechanical Design - Car Parts Mould  – Chapman detail pictures

Factory Free sample R&D Research Development Mechanical Design - Car Parts Mould  – Chapman detail pictures

Factory Free sample R&D Research Development Mechanical Design - Car Parts Mould  – Chapman detail pictures

Factory Free sample R&D Research Development Mechanical Design - Car Parts Mould  – Chapman detail pictures

Factory Free sample R&D Research Development Mechanical Design - Car Parts Mould  – Chapman detail pictures


Related Product Guide:

We keep on with our business spirit of "Quality, Performance, Innovation and Integrity". We goal to create much more worth for our customers with our rich resources, state-of-the-art machinery, experienced workers and exceptional providers for Factory Free sample R&D Research Development Mechanical Design - Car Parts Mould – Chapman , The product will supply to all over the world, such as: Tajikistan, Puerto Rico, Poland, Now we have a excellent team supplying specialist service, prompt reply, timely delivery, excellent quality and best price to our customers. Satisfaction and good credit to every customer is our priority. We have been sincerely looking forward to cooperate with customers all over the world. We believe we can satisfy with you. We also warmly welcome customers to visit our company and purchase our solutions.
  • The product classification is very detailed that can be very accurate to meet our demand, a professional wholesaler.
    5 Stars By Aaron from UAE - 2017.09.30 16:36
    The company's products very well, we have purchased and cooperated many times, fair price and assured quality, in short, this is a trustworthy company!
    5 Stars By Pearl from Germany - 2017.09.30 16:36
    Write your message here and send it to us